|
|
|
Forum Newbie
Group: Forum Members
Last Login: Tuesday, September 14, 2010 5:43 AM
Posts: 3,
Visits: 20
|
|
| I have a 225 HCCA amp I got new in 94. I havn't used it in years and I forgot how to wire it in 3 channel mode. I believe the sub is yellow\black- and orange+ is this right? What about the old woofer module, do I really need one? I will only use one 4ohm sub.
|
|
|
|
|
Forum Member
Group: Forum Members
Last Login: Sunday, August 28, 2011 2:59 PM
Posts: 37,
Visits: 102
|
|
For Sub it is Yellow and Orange. Also according the the manuals the 1st gen amps will not bridge without the bridging module.
Original Gen 1 manual
Revised Gen 1
I know that there is an E-bay seller that makes the bridging mods.
Here
Hope that helps
|
|
|
|
|
Forum Newbie
Group: Forum Members
Last Login: Tuesday, September 14, 2010 5:43 AM
Posts: 3,
Visits: 20
|
|
| The module i'm looking is a passive crossover. model# 4000-0008 CSX-TI4 XTR. It was also used to correct impedance. Without it, the amp may see too low an impedance and overheat.
|
|
|
|
|
Forum Newbie
Group: Forum Members
Last Login: Tuesday, September 14, 2010 5:43 AM
Posts: 3,
Visits: 20
|
|
| my amp seems to be a gen 2.2 the online manual is almost the same as mine was. this manual shows a 3-way passive crossover "CSX-TMC" I dont remember this one. I just want to know if I really need any type of crossover for mixed mono, it seems to work fine without one. if I do need one where can I get it? any help would be great. thanks "2fnloud" for the links.
|
|
|
|