|
|
|
Forum Newbie
Group: Forum Members
Last Login: Tuesday, March 30, 2010 5:13 PM
Posts: 3,
Visits: 13
|
|
OK so il be running two Orion HCCA D5000 and they have their own bass knob. i will not be strapping these and im trying to not use a EQ. is there any way around this? The bass knobs uses a headphone jack input to both the amp and remote.someone on another forum told me this" [color=5]the splitter on the bass knob wire might not preform correctly - the bass knob is just a potentiometer, so the amps are looking for a specific resistance. when you split the amp will see the bass knob in parallel with the input impedance on the other amp. it depends on the resistance range of that specific knob, and the circuitry of the amp.[/color] Any input?
|
|
|
|
|
Junior Member
Group: Forum Members
Last Login: Tuesday, June 29, 2010 7:39 AM
Posts: 18,
Visits: 348
|
|
|
|
|
|
Forum Member
Group: Forum Members
Last Login: Sunday, August 28, 2011 2:59 PM
Posts: 37,
Visits: 102
|
|
Set one amplifier to master, the other to slave.
have RCA from source to master amp, then RCA from master amp to slave amp.
Use one bass knob on master amp, slave amp will mimic master amp.
Besides you can not strap the D5000's
|
|
|
|
|
Junior Member
Group: Forum Members
Last Login: Tuesday, June 29, 2010 7:39 AM
Posts: 18,
Visits: 348
|
|
| hey you can not use one knob to control both
|
|
|
|
|
Forum Newbie
Group: Forum Members
Last Login: Thursday, September 02, 2010 9:22 PM
Posts: 8,
Visits: 29
|
|
Yes you can! I have the manual. It says " one RGC can be used on multiple sub amplifiers. plug the RGC into the first amp which will have it's AUX OUT selection switch in the "MASTER" position. the RGC information will now be sent to subsequent amps via the "MASTER" signal." 
|
|
|
|
|
Forum Member
Group: Forum Members
Last Login: Sunday, August 28, 2011 2:59 PM
Posts: 37,
Visits: 102
|
|
Youngone (4/8/2010)
Yes you can! I have the manual. It says " one RGC can be used on multiple sub amplifiers. plug the RGC into the first amp which will have it's AUX OUT selection switch in the "MASTER" position. the RGC information will now be sent to subsequent amps via the "MASTER" signal."
Isn't that what I said to do? Thank you for the back up.
|
|
|
|
|
Junior Member
Group: Forum Members
Last Login: Tuesday, June 29, 2010 7:39 AM
Posts: 18,
Visits: 348
|
|
| hey young one tell me more im sorry if i say it doesnt work but i have to amps and i try and it dont work
|
|
|
|
|
Forum Newbie
Group: Forum Members
Last Login: Thursday, September 02, 2010 9:22 PM
Posts: 8,
Visits: 29
|
|
| I will have to come back to you on that one. Im waiting on my rgc for my amps. I have two orion hcca 250 g5 ill have amp on master and the other one on copy(slave). ill let ya know.
|
|
|
|