OrionCarAudio.com Forum / Orion Community Support / Speakers

HCCA62

johnny85 — Wed, 30 Jun 2010 17:58:29 GMT

i have a 2008 jeep wrangler , i wanna put hcca speakers, i wanna get 1 set hcca62 component system and i would also like to get hcca62 in the back but dont need the tweeters .....

i have a hybrid memphis amp .... 2 or 4 ohm .... would i be able to plug these 3 ohm speakers to my memphis hybrid 1400 ?

P6.2 component set connection and prefer amp?

lung6133 — Wed, 13 Jan 2010 06:43:09 GMT

i have 2 sets of P6.2 components,planning to install it to my front and rear door,but i find out that the crossover have 4 input..and it can be bi-wire or parallel...what that mean for?how the proper connection look like?how many channel amp should i use to run 2 sets of it?can anyone give me some advice n information about the connection...newbies here..thanks for the reply.:)

Orion NT 6S

spiritofnorway — Mon, 18 Jan 2010 10:30:49 GMT

Hello:)
I have an Orion NT 6S 2 Way System of 1996 would ensure a description (manual) need ...
Can you help me please. On the HP I unfortunately do not find anything.
Greetings from Austria;)
Geri

wiring dvc

budh420 — Sun, 03 Jan 2010 19:22:34 GMT

I have a question about wiring an orion hcca 10 2, can you wire both coils to one amp on different channels, right now I am mixing home audio with car audio, my amp is home audio stable from 2-16 ohms, I had my amp wired to just one voice coil off 2 speaker and I just read on the internet that you have to wire both voice coils or you can damage your speakers is this true? I am only running one speaker off my amp right now and I wired each channel to a voice coil and it seems to hit harder than when I had 2 speakers hooked up, is this ok? my amp never clips or sounds distorted or anything and has all the latest protection circuitry and nothing suggestes that something might be wrong, my amp is a cr*wn xti 4000.

Thanks In Advance

Orion Car Audio at CES in Las Vegas!

OrionAdmin — Wed, 06 Jan 2010 15:08:25 GMT

Orion Car Audio is at CES in Las Vegas, January 7-10, 2010! Come see what's new at our booth: North 1409 -- hope to see you all there!